Vacuum oven medium vacuum XFM

XFM vacuum ovens are suitable for sensitive product drying applications, outgassing, thermal treatments of oxidizable materials, quick drying of powders and granulates...

Max temperature :
200°C / 250°C (optional)

Vacuum range (absolute pressure) :
up to 10-² mbar

6 sizes : 20, 51, 110, 220, 316 and 512 liters.

Robust build
for lasting performances.

The outside of the vacuum ovens is made of steel covered with white and blue epoxy paint.
The inner casing is made of corrosion resistant stainless steel.

THICKNESS ISOLATION
The outer casing is separated from the inner casing to prevent any loss of heat.
Non-asbestos insulation allows low surface temperatures, reduced power consumption and rapid temperature rise.

DOOR WITH VIEWING WINDOW
Thick safety glass window which avoid overpressure.

SEALING
The seal on the door is guaranteed by a long-life silicone gasket. It can be replaced with a viton seal (option). Locking by adjustable clamps

EASY CLEANING
Rounded corners and removable racks allow easy cleaning.

Reliable temperature on your products.
Heating is ensured by heating elements located on outer faces of the inner casing for best homogeneity.
XFM vacuum ovens have 2 temperature sensors : 1 probe fixed on the side, 1 other is mobile to be integrated on your product. The controller automatically adjusts the temperature of the walls for a perfect precision on your products.

Easy temperature measurements !
An DN16 KF entry port allows to insert up to 4 temperature probes.

A reliable connection of your vacuum pump.
The electrical connection of the vacuum pump is made directly to the back of the oven. A KF-type connector allows air to be pumped and a nipple ensures air release.

One device, complete management !
The ovens are controlled by a 5.7" color touch screen controller. Very intuitive and easy to use.

TEMPERATURE CONTROL
Automatic control and real-time monitoring of temperature measured by a thermocouple probe J.

VACUUM CONTROL
High precision PID control. Several modes of vacuum regulation are possible : maximum vacuum level of the pump; maintaining a constant pressure. Automatic control of solenoid valves for changing the vacuum level. Real-time monitoring of vaccum level.

HISTORY OF TREATMENTS
A USB port is used to store process data (vacuum temperatures and vacuum levels). These values can only be used by the controller.

Note : The oven can be controlled via a PC with an RJ45 cable.

Work safely !

The safety of the oven is ensured by a thermostat without reset (protection class 3.1) with visual and audible alarm. It measures the temperature in the volume, and supports temperature control in the event of failure of the temperature controller.

It switches off heating in case of overheating until the temperature drops below the set value.

The temperature controller has additional safety that follows the set temperature of your oven. When the measured temperature exceeds set temperature by 5°C, heating is stopped.