Exhaust Mist Filters

Model EMF10 mist filter

A46226000

  • Overview
  • Prices & Options
  • Features & Benefits
  • Technical Data
  • Accessories
  • Documents & Support

 

Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil. 
  
The EMF10 mist filter is suitable for use with RV3, RV5 and RV8 pumps. They are very efficient at 99.999% DOP test and are also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. The EMF filters have a unique odor element which neutralizes the smell of oil mist. 
  
Supplied with NW25 clamp, centering ring and ‘O’ ring, NW25 to 3/4 inch BSP adaptor.


MF300 Outlet Mist Filter

A46204000

  • Overview
  • Prices & Options
  • Features & Benefits
  • Technical Data
  • Accessories
  • Documents & Support

 

The MF30, MF100 and MF300 mist filters are suitable for pumps from E2M28 to E2M275. They are very efficient at 99.85% DOP test (pre-wetted filter; 99.5% with dry element). The oil level sight-glass provides easy monitoring of mist filter status.

A version of the EMF clean application oil return kit is available for all the MF filters, except the MF100AE. 
  
Supplied with two ISO40 ‘C’ clamps, ISO40 elbow, two 40 mm Co-Seals, bolts, washers, mounting brackets and studs.


MF100 Outlet Mist Filter

A46203000

  • Overview
  • Prices & Options
  • Features & Benefits
  • Technical Data
  • Accessories
  • Documents & Support

Overview

The MF100 mist filter is suitable for pumps from E2M28 to E2M80. They are very efficient at 99.85% DOP test (pre-wetted filter; 99.5% with dry element). The oil level sight-glass provides easy monitoring of mist filter status. 

A version of the EMF clean application oil return kit is available for all the MF filters, except the MF100AE. 
  
Supplied with two NW25 ‘C’ clamps, NW25 elbow, two NW25 centering ring and ‘O’ rings, bolts, washers, mounting brackets and studs


Seal EMF10 Mist Filter

A27159535

  • Overview
  • Prices & Options
  • Features & Benefits
  • Technical Data
  • Accessories
  • Documents & Support

Overview

A27159535 – EMF10 Body Seal for Outlet Mist Filters